Specialized Injection Molding Techniques

Written By Hans-Peter Heim
Specialized Injection Molding Techniques
  • Publsiher : William Andrew
  • Release : 02 November 2015
  • ISBN : 0323371213
  • Pages : 262 pages
  • Rating : 4/5 from 21 reviews
GET THIS BOOKSpecialized Injection Molding Techniques


Read or download book entitled Specialized Injection Molding Techniques written by Hans-Peter Heim which was release on 02 November 2015, this book published by William Andrew. Available in PDF, EPUB and Kindle Format. Book excerpt: Special Injection Molding Techniques covers several techniques used to create multicomponent products, hollow areas, and hard-soft combinations that cannot be produced with standard injection molding processes. It also includes information on the processing techniques of special materials, including foaming agents, bio-based materials, and thermosets. The book describes the most industrially relevant special injection molding techniques, with a detailed focus on understanding the basics of each technique and its main mechanisms, i.e., temperature, mold filling, bonding, residual stresses, and material behavior, also providing an explanation of process routes and their variants, and discussions of the most influencing process parameters. As special molding technologies have the potential to transform plastics processing to a highly-efficient, integrated type of manufacturing, this book provides a timely survey of these technologies, putting them into context, accentuating new opportunities, and giving relevant information on processing. Provides information about the basics needed for understanding several special injection molding techniques, including flow phenomena, bonding mechanisms, and thermal behavior Covers the basics of each technique and its main mechanisms, i.e., temperature, mold filling, bonding, residual stresses, and material behavior Discusses the most relevant processing parameters for each injection molding technique Presents a variety of techniques, including gas and water assisted injection molding, multi component injection molding, hybrid injection molding, injection molding of bio-based materials, and techniques for thermoset

Specialized Injection Molding Techniques

Specialized Injection Molding Techniques
  • Author : Hans-Peter Heim
  • Publisher : William Andrew
  • Release Date : 2015-11-02
  • Total pages : 262
  • ISBN : 0323371213
GET BOOK

Summary : Special Injection Molding Techniques covers several techniques used to create multicomponent products, hollow areas, and hard-soft combinations that cannot be produced with standard injection molding processes. It also includes information on the processing techniques of special materials, including foaming agents, bio-based materials, and thermosets. The book describes the most industrially ...

Specialized Molding Techniques

Specialized Molding Techniques
  • Author : Hans-Peter Heim,H. Potente
  • Publisher : Cambridge University Press
  • Release Date : 2008-12-05
  • Total pages : 350
  • ISBN : 0323371213
GET BOOK

Summary : A surge of new molding technologies is transforming plastics processing and material forms to the highly efficient, integrated manufacturing that will set industry standards in the early years of this century. This book is a survey of these technologies, putting them into context and accentuating opportunities. The relations among these ...

Specialized Molding Techniques

Specialized Molding Techniques
  • Author : Hans-Peter Heim,H. Potente
  • Publisher : William Andrew
  • Release Date : 2002-12-31
  • Total pages : 350
  • ISBN : 0323371213
GET BOOK

Summary : A surge of new molding technologies is transforming plastics processing and material forms to the highly efficient, integrated manufacturing that will set industry standards in the early years of this century. This book is a survey of these technologies, putting them into context and accentuating opportunities. The relations among these ...

Injection Molding Handbook

Injection Molding Handbook
  • Author : D.V. Rosato,Marlene G. Rosato
  • Publisher : Springer Science & Business Media
  • Release Date : 2012-12-06
  • Total pages : 1460
  • ISBN : 0323371213
GET BOOK

Summary : This third edition has been written to thoroughly update the coverage of injection molding in the World of Plastics. There have been changes, including extensive additions, to over 50% of the content of the second edition. Many examples are provided of processing different plastics and relating the results to critiCal factors, ...

Multicomponent Polymeric Materials

Multicomponent Polymeric Materials
  • Author : Jin Kuk Kim,Sabu Thomas,Prosenjit Saha
  • Publisher : Springer
  • Release Date : 2016-08-26
  • Total pages : 410
  • ISBN : 0323371213
GET BOOK

Summary : The book offers an in-depth review of the materials design and manufacturing processes employed in the development of multi-component or multiphase polymer material systems. This field has seen rapid growth in both academic and industrial research, as multiphase materials are increasingly replacing traditional single-component materials in commercial applications. Many obstacles ...

Foaming with Supercritical Fluids

Foaming with Supercritical Fluids
  • Author : Ernesto Di Maio,Salvatore Iannace,Giuseppe Mensitieri
  • Publisher : Elsevier
  • Release Date : 2021-11-06
  • Total pages : 484
  • ISBN : 0323371213
GET BOOK

Summary : Foaming with Supercritical Fluids, Volume Nine provides a comprehensive description of the use of supercritical fluids as blowing agents in polymer foaming. To this aim, the fundamental issues on which the proper design and control of this process are rooted are discussed in detail, with specific attention devoted to the ...

Specialized Molding Techniques

Specialized Molding Techniques
  • Author : Hans-Peter Heim,H. Potente
  • Publisher : William Andrew
  • Release Date : 2001
  • Total pages : 336
  • ISBN : 0323371213
GET BOOK

Summary : A survey of molding technologies in context. The relations among these technologies are analyzed in terms of products, materials, processing, and geometry....

Processing Structure Properties Relationships in Polymers

Processing Structure Properties Relationships in Polymers
  • Author : Roberto Pantani
  • Publisher : MDPI
  • Release Date : 2019-12-05
  • Total pages : 400
  • ISBN : 0323371213
GET BOOK

Summary : This collection of research and review papers is aimed at depicting the state of the art on the possible correlations between processing variables, obtained structure and special properties which this structure induces on the plastic part. The extraordinary capacity of plastics to modify their properties according to a particular structure ...

Polymer Process Engineering

Polymer Process Engineering
  • Author : R. Griskey
  • Publisher : Springer Science & Business Media
  • Release Date : 2012-12-06
  • Total pages : 478
  • ISBN : 0323371213
GET BOOK

Summary : Polymers are ubiquitous and pervasive in industry, science, and technology. These giant molecules have great significance not only in terms of products such as plastics, films, elastomers, fibers, adhesives, and coatings but also less ob viously though none the less importantly in many leading industries (aerospace, electronics, automotive, biomedical, etc.). ...

Recent Research inPolymerization

Recent Research inPolymerization
  • Author : Nevin Çankaya
  • Publisher : BoD – Books on Demand
  • Release Date : 2018-01-17
  • Total pages : 216
  • ISBN : 0323371213
GET BOOK

Summary : The purpose of this book is to help you concentrate on recent developments in polymerization. The chapters collected in the book are contributions by invited researchers with a long-standing experience in different research areas. I hope that the material presented here is understandable to a broad audience, not only chemists ...

PEEK Biomaterials Handbook

PEEK Biomaterials Handbook
  • Author : Steven M. Kurtz
  • Publisher : William Andrew
  • Release Date : 2019-03-15
  • Total pages : 465
  • ISBN : 0323371213
GET BOOK

Summary : PEEK biomaterials are currently used in hundreds of thousands of spinal fusion patients around the world every year. Durability, biocompatibility, and excellent resistance to aggressive sterilization procedures make PEEK a polymer of choice, replacing metal in orthopedic implants, from spinal implants and knee replacements to finger joints and dental implants. ...

Injection Molding Handbook

Injection Molding Handbook
  • Author : Donald V. Rosato,D.V. Rosato
  • Publisher : Springer
  • Release Date : 1995
  • Total pages : 1145
  • ISBN : 0323371213
GET BOOK

Summary : This is an extensively revised and reorganized edition of the acknowledged standard work in the field of injection molding....

Disposable Products Manufacturing Handbook

Disposable Products Manufacturing Handbook
  • Author : NPCS Board of Consultants & Engineers
  • Publisher : NIIR PROJECT CONSULTANCY SERVICES
  • Release Date : 2014-01-01
  • Total pages : 528
  • ISBN : 0323371213
GET BOOK

Summary : Disposable Products Manufacturing Handbook (Plastic Cups, Cutlery, Paper Cups, Banana Leaf Plates, Facial Tissues, Wet Wipes, Toilet Paper Roll, Sanitary Napkins, Baby Diapers, Thermocol Products, PET Bottles) Everyday life products manufacturers worldwide produce a multitude of items that are intended for one use only. A disposable is a product designed ...

The Complete Technology Book on Plastic Extrusion Moulding And Mould Designs

The Complete Technology Book on Plastic Extrusion  Moulding And Mould Designs
  • Author : NIIR Board of Consultants and Engineers
  • Publisher : ASIA PACIFIC BUSINESS PRESS Inc.
  • Release Date : 2006-10-01
  • Total pages : 496
  • ISBN : 0323371213
GET BOOK

Summary : Plastics extrusion is a high volume manufacturing process in which raw plastic material is melted and formed into a continuous profile. Extrusion produces items such as pipe/tubing, weather stripping, fence, deck railing, window frames, adhesive tape and wire insulation. There are fundamentally two different methods of extruding film, namely, ...

Microcellular Injection Molding

Microcellular Injection Molding
  • Author : Jingyi Xu
  • Publisher : John Wiley & Sons
  • Release Date : 2011-01-06
  • Total pages : 618
  • ISBN : 0323371213
GET BOOK

Summary : This book presents the most important aspects of microcellular injection molding with applications for science and industry. The book includes: experimental rheology and pressure-volume-temperature (PVT) data for different gas materials at real injection molding conditions, new mathematical models, micrographs of rheological and thermodynamic phenomena, and the morphologies of microcellular foam ...